Mesh Filter with Plastic, Rubber, or Metal Ends

  • Mist eliminator, diameter 360 - 380 mm, thickness 250 - 300 mm.
  • Air filter, material: stainless steel, size: 5" long × 2-1/2" tall × 3/16" thick.
  • Suction strainer, diameter 2", opening 1/2".
  • Air filter with size 16 × 25 × 1 and also 20 × 25 × 1.
  • Wire mesh strainer to fit a fuel inlet neck, strainer 1-1/4" diameter by 12" long.
  • 40 micron stainless steel mesh oil filter cartridge with 440 mm length and outside diameter 180 mm.
  • Wire mesh air filter, outside diameter 14.5 cm, inside diameter 11.5 cm, height 23.5 cm.
  • Air filter elements, a round pleated air filter for combustion air 8" long, 8"wide, 4-3/4" opening in the center the ends are plastic or rubber.
  • SS wire mesh sheet for suction strainer, mesh size: 3 mm × 3 mm, wire diameter: 1.70 mm, material: SS 316L.
  • 50 micron stainless steel mesh oil filter cartridge, length: 450 mm, outside diameter:185 mm, oil inlet eye diameter:95 mm, cap:65 lpm, pr: 3 kg/cm2.
A corner of stainless steel mist eliminator with welded top grid.
Mist eliminator with welded top grid.
  • Air filter - cylinder shape.
    • Filter size: 17.5" OD × 26" length.
    • Flange size: 18.75" OD × 14" ID.
    • End type: galvanized top with open style and galvanized bottom with open style.
    • Filter media area: 21 m2.
  • A cylinder shape air filter element with pleated HEPA inside and expanded metal outside.
    Air filter element.
  • Air filter mesh.
    • Thickness: 20 mm.
    • Airflow speed: 1.5 m/s.
    • Initial pressure drop: 50 Pa.
    • Final pressure: 250 Pa.
    • Filter class: G4.
    • Dust retention capacity: 460.
    • Dimensions: width 2 m, length 20 m.
  • Strainer for crude oil filtration.
    • Screen material: stainless steel.
    • Strainer diameter: 1/8".
    • Flange size: 8".
    • Flange standard materials: A216 WCB/A 105 API5L.
    • Basket type: strainer Mono-In- line strainer.
    • Cover type: quick release cover.
  • Suction strainer, basket type strainers.
    • Material: SS 316L.
    • Liquid handled: effluent.
    • Max opening size: 62.992 mm.
    • Liquid handled: effluent.
    • Additional information: clear opening area is 3 times the nominal pipe cross section area.
  • Suction strainer, basket type strainers.
    • Material: SS 316L.
    • Liquid handled: effluent.
    • Max opening size: 52.83 mm.
    • Additional information: clear opening area is 3 times the nominal pipe cross section area.
  • Demister pad without grid.
    • Pad material: SS 304L.
    • Pad diameter: 0.27".
    • Mesh density: 145 kg/m3.
    • Mesh size (l × w × t): 2 m × 500 mm × 200 mm.
    • Mesh size (l × w × t): 2 m × 500 mm × 350 mm.
    • Mesh size (l × w × t): 2 m × 500 mm × 150 mm.
  • Oil filter cylinder shape.
    • Cylinder diameter: 21" or 20.6".
    • Cylinder length: 9.5".
    • Wire diameter: 0.5 mm.
    • Material: stainless steel.
    • Overlap at joining edge: min 3.0 mm.
    • Additional information: silver solder joining edge and both ends.
  • Cylinder filter.
    • Size: 64" OD, 28" ID, 10" or 20" length.
    • Material: sintered stainless steel.
    • Micron ratings: 1, 10, 20 and 50 microns.
    • End type: double open end.
  • Stainless steel wire mesh filter.
    • Material: AISI 316L.
    • Mesh counts: 24 or 110.
    • Diameter: 0.36" or 0.25".
    • Application: for filtering liquid sulfur.
A PP demister pad with PP grid is divided into 3 sections.
PP demister pad.
A stainless steel demister pad with welded top grid.
Stainless steel demister pad.
A cap filter with closed bottom and open top.
Cap filter for hydraulic fluid.
Single layer stainless steel filter disc is installed in a vessel.
Filter disc is installed in a vessel.

Inquiry for Our Product

Boegger Industrial Limited
Email: info@wiremeshfilter.org

When you contact us, please provide your detail requirements. That will help us give you a valid quotation.