Wire Mesh Filter - Plain Weave or Dutch Weave

Two cap shape stainless steel 316 compressed knitted wire mesh filter.
Compressed knitted wire mesh filter for mufflers of pneumatic tool.
Two ring shape wire mesh pad and a round wire mesh pad.
Knitted wire mesh pad: round and ring shape.
A stainless steel compressed knitted mesh filter ring in a man's hand.
Compressed knitted wire mesh filter ring.
A compressed knitted mesh hallow square filter in a man's hand.
Compressed knitted wire mesh hallow square filter.
A roll of stainless steel compressed knitted mesh filter belt in a man's hand.
Compressed knitted wire mesh filter belt.
A thin compressed knitted mesh filter ring in a man's hand.
A thin compressed knitted wire mesh filter ring.
  • Knitted filter wire mesh, 6' × 8'.
  • Metal mesh filters with size 12" × 12"x 3/8".
  • Metal mesh, stainless steel, 0.1 mm wire thickness and 75% porosity.
  • Stainless steel fine wire mesh, cylindrical form, outside diameters 1 mm to 5 mm.
  • 150 mesh stainless steel cylindrical screen to slip over a 36" long schedule 40 perforated pipe to serve as a gray water filter.
  • Stainless steel perforated metal cylinder 3/8" hole size and 2" NPT connection at one end.
  • Stainless steel mesh filter, 30 mesh × .012" wire diameter.
  • Stainless steel filter disc, mesh size: 1 mm × 1 mm, mesh thickness: 0.8 mm, mesh diameter: 22.5 mm, 1 inch 20 holes and 24 holes needed.
  • Stainless steel wire mesh, mesh hole size: 1.6 mm( aperture ) × 0.7 mm (thickness), length: 3 meter × 3 meter.
  • Stainless steel wire mesh tubes with 60 × 60 mesh, 0.165 mm wire diameter, 5" length and 1.75" in diameter.
  • Knitted wire mesh filter, size 2.5" OD, 0.5" ID, 1" tall, for an engine breather, and air needs to be able to go through while not allowing oil droplets to go through.
  • Single screen filter discs 50 mm in diameter, 50 or 100 mesh, stainless steel, twilled or dutch weave.
  • 20, 30 or 50 mesh, low carbon steel wire woven disc, 1.00" diameter.
  • Filter wire cloth.
    • Material: stainless steel.
    • Filtration: 100 micron.
    • Shape: disk.
    • Diameter 100 mm.
    • Air flow: 1700 l/min.
  • Wire mesh filters for filtering air.
    • Flow rate: 6000 CFM.
    • Filtration: 3 micron.
    • Filter size: 4" diameter × 60" long.
    • Additional information: with a flange top and a sealed bottom.
  • Stainless steel mesh filter.
    • Filter size: 780 mm length and 245 mm diameter.
    • Filter shape: tube shape.
    • Mesh counts: 30 or 35 mesh.
  • Stainless steel and galvanized mesh.
    • Wire diameter: 0.2 mm or 0.38 mm.
    • Filter size: 70 × 135 mm or 310 × 165 mm.
    • Square hole size: 2 mm.
  • Stainless steel strainer basket.
    • Mesh: 20 mesh per inch.
    • Wire diameter: 0.009".
  • Knitted wire mesh filter.
    • Outer diameter: 11.14 mm.
    • Thickness: 3.18 mm.
    • Wire diameter: 0.11 mm.
  • Filter element.
    • Dimension: OD 66.5 × ID 27 × LG 498 mm.
    • Service fluid: benfield solution.
    • Filtration: 10 micron.
    • Operating temperature: 120 deg c.
  • Stainless steel wire mesh filter.
    • Diameter 150 cm, grid sizes: 3 mm, 1 mm and 0.5 mm.
    • Diameter 200 cm, grid sizes: 3 mm, 1 mm and 0.5 mm.
  • Stainless steel expanded mesh filter.
    • Thickness: 0.3 mm.
    • Length: 100 mm.
    • Diameter: 13.5 mm.
  • Knitted mesh filter.
    • Diameter: 3.2 inch.
    • Height: 4.5 inch.
    • Material: stainless steel.

Inquiry for Our Product

Boegger Industrial Limited
Email: info@wiremeshfilter.org

When you contact us, please provide your detail requirements. That will help us give you a valid quotation.